Performing Automatic Verification Of Absence Of Electric Charge Using The PIWIS Tester

Information 

The test log for verifying absence of electric charge is created automatically in the PIWIS Tester. Print the test log, sign it and file it in the order folder.

If absence of electric charge could not be verified automatically or if the function could not be run (see PIWIS Tester display), the voltage must be measured manually.

Use > 9900 - PIWIS Tester 3  with > VAS 6558A - high-voltage testing module  and the test adapters > VAS 6558/9-6A - high-voltage test adapter  .