Removing Servo Motor For Front Left Centre Air Vent, Vertical

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

→ Switch off electrical loads before disconnecting or removing them.

Remove servo motor for front left centre air vent, -1- vertical.
1. 1.1 Release and disconnect electric plug connection -2- .
2. 1.2 Unscrew and remove screws -3- .
3. 1.3 Pull servo motor for front left centre air vent, vertical -1- off the guide lugs -4- and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Servo motor for front left centre air vent, vertical