Technical Values
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Minimum processing temperature | 000.043.3 05.87 | Minimum temperature | 15 °C | ||
| Maximum processing temperature | 000.043.3 05.87 | Maximum temperature | 28 °C | ||
| Structural foam bonding | 000.043.3 05.87 | Processing time at 20 °C | 90 min | ||
| Structural foam bonding | 000.043.3 05.87 | Processing time at 28 °C | 60 min | ||
| Minimum hardening temperature | 000.043.3 05.87 | Minimum temperature | 20 °C | ||
| Maximum hardening temperature | 000.043.3 05.87 | Maximum temperature | 50 °C | ||
| Assembly strength | 000.043.3 05.87 | Hardening time at 20 °C | 12 h | ||
| Assembly strength | 000.043.3 05.87 | Hardening time at 50 °C | 8 h | ||
| Endurance strength | 000.043.3 05.87 | Standing time at 20 °C | 24 h |