LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Collision - 53 Rear Body (Y1A)) >> 5368 Wheel Housing Rear >> WM, 53685505 Replacing Rear Wheel Housing (Outer) (Front Section) >> Subsequent Work For Body Repairs (Without Straightening System)

Subsequent Work For Body Repairs (Without Straightening System)

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prime joint areas and sheetmetal flanges with 2-component primer.
  2. Restore standard seal with body sealant.

    > 5X00IN03 CORROSION PROTECTION MEASURES DURING REPAIR WORK

    Also seal the repair area carefully.

  3. Paint repair area and adjacent surfaces, if necessary.
  4. Apply standard cavity preservation.

    > 5X00IN44 Cavity preservation

    Also carefully apply cavity preservation to the repair area.

  5. Install removed add-on parts in the repair area.
scientia non olet · About LEMON Manuals