LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Collision - 53 Rear Body (Y1A)) >> 5348 Side Member Rear >> WM, 53485503 Replacing Rear Side Member (Section) >> Removing Rear Side Member (Section)

Removing Rear Side Member (Section)

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew self-tapping screws.
    G15562577Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws

    G15562578Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws

    G15562579Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws

  2. Heat bonding areas using > V.A.G 1416 - Hot-Air Blower. 
    G15562580Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G15562581Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G15562582Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

  3. Remove rear side member (section).