LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Collision - 53 Rear Body (Y1A)) >> 5348 Side Member Rear >> WM, 534855 Replacing Rear Longitudinal Member >> Preparing Connection Areas Of The Body For Installing Seat-Well Cross Member >> Preparing Connection Areas Of Body For Installing The Seat Well Cross Member

Preparing Connection Areas Of Body For Installing The Seat Well Cross Member

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the sealing surfaces and connections of the body.
  2. De-burr connection points and prepare them for joining.
  3. Prepare the connection areas of the body for steel welding.
G15562717Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Steel welding

scientia non olet · About LEMON Manuals