LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Collision - 51 Body Center/Roof/Frame (Y1A)) >> 5192 Cover Front >> WM, 519219 Removing And Installing Cover For Front Underbody >> Installing Cover For Front Underbody

Installing Cover For Front Underbody

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws to > Tightening torque 2.5 Nm (1.8 ftlb.)  .

scientia non olet · About LEMON Manuals