Installing Dashboard Bracket

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws securing top of dashboard bracket to body to > Tightening torque 20 Nm (15 ftlb.) .

Tighten nuts securing dashboard bracket sides to body to > Tightening torque 20 Nm (15 ftlb.) .

Tighten screws for securing top of central computer holder to dashboard to > Tightening torque 3 Nm (2.2 ftlb.) .

Tighten screws for securing side of central computer holder to dashboard to > Tightening torque 3 Nm (2.2 ftlb.) .

Tighten screws securing bottom of dashboard bracket to body to > Tightening torque 20 Nm (15 ftlb.) .

Tighten nuts securing dashboard bracket to heating/fresh-air unit to > Tightening torque 8 Nm (6 ftlb.) .

Tighten screws securing centre console holder to dashboard bracket to > Tightening torque 4 Nm (3 ftlb.) .

Tighten screws securing holder for central buzzer to dashboard bracket to > Tightening torque 3 Nm (2 ftlb.) .