Technical Values
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Dimension A | Distance from bottom edge of side part | 230 mm | |||
| Dimension B | Distance from bottom edge of side part | 450 mm | |||
| Dimension | Distance from lower edge of side section from | distance | 320 mm | ||
| Dimension | Distance from lower edge of side section from | distance | 250 mm | ||
| Dimension X | Distance | 175 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| drill bit | diameter | 6.6 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm |