Technical Values
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
| * Location | * Des... | * Type | * Basic val... | * Toleranc... | * Toleranc... |
|---|---|---|---|---|---|
| Dimension A | Distance | 53 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| dimension A | distance | 47 mm | |||
| B | distance | 107 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| Dimension A | Distance | 38 mm | |||
| Dimension B | Distance | 20 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| Dimension A | Distance | 10 mm | |||
| Dimension B | Distance | 22 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| drill bit | Diameter | 6.6 mm | |||
| drill bit | Diameter | 4.0 mm | |||
| Adhesive application | Spread over the entire surface | Application height | 0.5 mm | ||
| Adhesive application | Spread over the entire surface | Application height | 0.5 mm | ||
| Adhesive application | Spread over the entire surface | Application height | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| Adhesive application | Spread over the entire surface | Application height | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| drill bit | diameter | 6.6 mm | |||
| drill bit | diameter | 4.0 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0, 5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| drill bit | diameter | 6.6 mm | |||
| Drill bit | Diameter | 4.0 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm | ||
| drill bit | diameter | 6.6 mm | |||
| drill bit | diameter | 4.0 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0, 5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 3 mm |