Installing Front Wheel Housing Liner
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws at the bottom to > Tightening torque 2.5 Nm (1.75 ftlb.) .
Tighten screws at the bottom to > Tightening torque 2.5 Nm (1.75 ftlb.) .
Tighten screws at the bottom to > Tightening torque 2.5 Nm (1.75 ftlb.) .
Tighten screws at the top to > Tightening torque 2.5 Nm (1.75 ftlb.) .
Tighten side screws to > Tightening torque 2.5 Nm (1.75 ftlb.) .
Tighten nuts to > Tightening torque 2.5 Nm (1.75 ftlb.) .