LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Collision - 50 Body, Front (Y1A)) >> 5053 Fender Connection Panel >> WM, 505355 Replacing Wing Joining Plate >> Preliminary Work For Body Repairs (Without Straightening System)

Preliminary Work For Body Repairs (Without Straightening System)

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  3. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminium repairs.

    > 5X00IN05 INFORMATION ON ALUMINIUM REPAIRS

  4. Remove underbody protection, paint an the like from the joint areas of the body using a hot-air blower or rotary brush.
scientia non olet · About LEMON Manuals