LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Collision - 50 Body, Front (Y1A)) >> 5038 Lock Support Panel >> WM, 503855 Replacing Lock Carrier >> Assembling Lock Carrier

Assembling Lock Carrier

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble in reverse order. Pay particular attention to the following:

    Tighten screws securing bracket reinforcement to lock carrier to > Tightening torque 13 Nm (9.5 ftlb.)  .

scientia non olet · About LEMON Manuals