LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Collision - 50 Body, Front (Y1A)) >> 5038 Lock Support Panel >> WM, 503819 Removing And Installing Lock Carrier >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screws securing pull strap to lock carrier
G15559777Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Item 1 Tightening torque 8 Nm (6 ftlb.)    
Screws securing lock carrier to impact absorber
G15559778Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Item 1 Tightening torque 20 Nm (15 ftlb.)    
Screws securing front apron to lock carrier
G15559779Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Item 2 Tightening torque 5.5 Nm (4 ftlb.)    
Screw securing sensor to lock carrier
G15559780Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front sensor
Item 1 Tightening torque 9 Nm (6.5 ftlb.)    
Screw securing washer-fluid reservoir to lock carrier
G15559781Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Washer-fluid reservoir
Item 1 Tightening torque 9 Nm (6.5 ftlb.)