Installing Lock Carrier
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws to > Tightening torque 8 Nm (6 ftlb.) .
Tighten screws to > Tightening torque 20 Nm (15 ftlb.) .
Tighten screws to > Tightening torque 5.5 Nm (4 ftlb.) .
Tighten screw to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten screw to > Tightening torque 9 Nm (6.5 ftlb.) .