Installing Cross Member
WARNING: This page is about a different car, the 2023 Porsche Taycan and 2022 Porsche Taycan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Tighten screw.
> Tightening torque 55 Nm
Information
New screws must be used.
- 1.2 Tighten screws.
> Tightening torque 50 Nm
> Torque angle 180 °
- 1.1 Tighten screw.