| Front bracket to rear-axle final drive |
Item 4: Screw, M12 x 100 - replace screw |
Initial tightening |
70 Nm (52 ftlb.) |
|
|
| Front bracket to rear-axle final drive |
Item 4: Screw, M12 x 100 - replace screw |
Final tightening torque angle |
90 ° |
|
|
| Rear bracket to electric motor on rear axle |
Item 2: Screw, M10 x 55 - replace screw |
Initial tightening |
50 Nm (37 ftlb.) |
|
|
| Rear bracket to electric motor on rear axle |
Item 2: Screw, M10 x 55 - replace screw |
Final tightening torque angle |
60 ° |
|
|
| Front left bracket to rear final drive |
Item 2: Screw, M12 x 75 - replace |
Initial tightening |
70 Nm (52 ftlb.) |
|
|
| Front left bracket to rear final drive |
Item 2: Screw, M12 x 75 - replace |
Final tightening torque angle |
90 ° |
|
|
| Front left bracket to rear final drive |
Item 3: Screw, M10 x 80 - replace |
Initial tightening |
60 Nm (44 ftlb.) |
|
|
| Front left bracket to rear final drive |
Item 3: Screw, M10 x 80 - replace |
Final tightening torque angle |
90 ° |
|
|