LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> Collision >> Body Panels >> 55 Lids, Flaps -- Y1A - TAYCAN (Y1A) >> 5582 Rear Lid Release Switch >> WM, 558219 Removing And Installing Rear Lid Release Switch >> Removing Rear Lid Release Switch

Removing Rear Lid Release Switch

NOTE: Voltage peaks 
  • Risk of damage to electrical load or to the control unit 

    → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

    → Switch off electrical loads before disconnecting or removing them.

  1. Remove rear lid release switch -1-  .
    G15563378Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear lid release switch

    1. 1.1 Unclip rear lid release switch -1-  using a suitable tool -arrows A-  .
    2. 1.2 Guide out rear lid release switch -1-  (-arrow B-  ) and release and disconnect electric plug connection.
    3. 1.3 Remove rear lid release switch.
scientia non olet · About LEMON Manuals