LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> Collision >> Body Panels >> 55 Lids, Flaps -- Y1A - TAYCAN (Y1A) >> 5540 Side Section Flap >> WM, 554055 Replacing Mechanical Power Supply Flap (Module) >> Installing Mechanical Power Supply Flap (Module)

Installing Mechanical Power Supply Flap (Module)

Installation is performed in reverse order. Pay particular attention to the following:

  1. Tighten screws to > Tightening torque 2.5 Nm (1.844 ftlb.)  .
scientia non olet · About LEMON Manuals