LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> Collision >> Body Panels >> 55 Lids, Flaps -- Y1A - TAYCAN (Y1A) >> 5540 Side Section Flap >> WM, 554055 Replacing Electric Power Supply Flap (Module) >> Installing The Locking Mechanism For The Electric Power Supply Flap (Module)

Installing The Locking Mechanism For The Electric Power Supply Flap (Module)

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws to > Tightening torque 2.5 Nm (1.75 ftlb.)  .

scientia non olet · About LEMON Manuals