LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis >> Collision >> Body Panels >> 55 Lids, Flaps -- Y1A - TAYCAN (Y1A) >> 5540 Side Section Flap >> WM, 554019 Removing And Installing Electrical Side Section Flap (Engine) >> Installing Side Section Flap (Engine)

Installing Side Section Flap (Engine)

  1. Install in reverse order.

    Tighten the screws of the side section flap motor to the side section flap module to > Tightening torque 3.5 Nm (2.5 ftlb.) (2.6 ftlb.)  .

    The electric plug connection must engage securely.

scientia non olet · About LEMON Manuals