Repair The Antenna Cable In The Left Rear Bumper Connection Point Area (Rear Surround View Camera)
- Detach electrical wire harness -1-
form rear end body.
Electrical wire harness on rear end body
- 1.1 Unlock and pull off electric plug connection to Lane Change Assist control unit -2- .
- 1.2 For vehicles with E-Sound generator:
Unlock and pull off electric plug connection to E-Sound Generator -3- .
- 1.3 Unclip clips -4- with a plastic spatula and put electrical wire harness -1- to one side.
- Detach antenna cable -1-
in left rear bumper connection point area -2-
.
Antenna cable in the left rear bumper connection point area
- 2.1 Unlock and open holder -3- .
- 2.2 Unclip electrical plug connections to left rear bumper connection point -4- and splash water hose -5- .
- 2.3 Expose the damaged area of antenna cable -1- in the electrical wire harness.
- Repair antenna cable.
- Installation is performed in reverse order. Pay particular attention to the following:
- 4.1 Push on the electric plug connections until you feel them lock.