LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 536919 Removing And Installing Rear Wheel Housing Liner >> Installing Rear Wheel Housing Liner

Installing Rear Wheel Housing Liner

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten side nuts to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten outer nut to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten outer screws to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten inner nuts to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten inner screw to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

scientia non olet · About LEMON Manuals