Preparing (Inner) Rear Wheel Housing

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

1. 2.1 Drill bore holes for blind rivets -B-  through both sheet metal plates using>diameter 6.6 mm  .
2. 2.2 Drill holes for countersunk blind rivets -C-  through both sheet metal panels with >diameter 6.5 mm  .
3. 2.3 Counterbore rivet holes -C-  with >VAS 6957 - 100°countersink  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas

1. 8.1 Prepare marked areas -A-  for bonding and riveting.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

2. 8.2 Prepare marked area -B-  for resistance spot-welding.
3. 8.3 Prepare marked areas -C-  for full steel welding.

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas