Removing Rear Wheel Housing (Outer) (Front Section)
- Loosen rear wheel housing (outer) (front section).
Joints
JOINT AREA DESCRIPTION
A Drill out spotwelds. B Drill out penetrated joints with >diameter 4 mm . - Loosen rear wheel housing (outer) (front section).
Joints
JOINT AREA DESCRIPTION
1 Unscrew self-tapping screw. 2 Separate welded seams. - Heat the marked bonding areas using >V.A.G 1416 - hot-air blower
.
Bonding area
- Remove rear wheel housing (outer) (front section).