Removing (Outer) Rear Wheel Housing (Sub-Section)

Information 

Only make cuts in the top plate. Make sure not to damage the plate underneath when doing this.

1. Mark and make cuts -A-  and -B-  .

   >Distance 20 mm 

   >Distance 25 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Separation points

2. Drill out penetrated joints -A-  and -B-  using >diameter 4 mm  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Penetrated joints

3. Remove (outer) rear wheel housing (sub-section).