Removing (Outer) Rear Wheel Housing
- Drill through connection points -LHD vehicle -
and -RHD vehicle -
using >diameter 4 mm
.
Front connection points
- Loosen connection points -LHD vehicle -
and -RHD vehicle -
.
Rear connection points
- 2.1 Remove punch rivets -LHD vehicle - using >VAS 6790 - compact booster .
- 2.2 Drill through penetrated joints using >diameter 4 mm .
- Drill through penetrated joints using >diameter 4 mm
.
Penetrated joints
- Remove (outer) rear wheel housing.