Preparing (Outer) Rear Wheel Housing For Installation

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Penetrated joints

1. 2.1 Drill bore holes for blind rivets -LHD vehicle -  using a drill bit with a diameter of >diameter 6.6 mm  .
2. 2.2 Punch holes for flow-form rivets -RHD vehicle -  .

   > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

1. 3.1 Counterbore the rivet holes with >VAS 6957 - 100°countersink  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

1. 5.1 Drill bore holes for blind rivets -LHD vehicle -  using a drill bit with a diameter of >diameter 6.6 mm  .
2. 5.2 Drill bore holes -RHD vehicle -  for blind rivets through both sheet metal plates using >diameter 6.5 mm  .
   1. 5.2.1 Counterbore the rivet holes with >VAS 6957 - 100°countersink  .

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area