LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 536255 Replacing Frame For Light >> Subsequent Work For Body Repairs (Without Straightening System)

Subsequent Work For Body Repairs (Without Straightening System)

  1. Prime joint areas and sheetmetal flanges with 2K primer.
  2. Restore standard seal using body sealant.

    > 5X00IN03 CORROSION PROTECTION MEASURES DURING REPAIR WORK

    Also seal the repair area carefully.

  3. Paint repair area and adjacent surfaces, if necessary.
  4. Apply standard cavity preservation.

    > 5X00IN44 CAVITY PRESERVATION

    Also carefully apply cavity preservation to the repair area.

  5. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals