LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 536255 Replacing Frame For Light >> Removing Holder

Removing Holder

  1. Drill out penetrated joints using >diameter 6.7 mm  .
    G14412317Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Penetrated joints

  2. Heat bonding areas using >V.A.G 1416 - Hot-Air Blower  .
    G14412318Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  3. Remove holder.
scientia non olet · About LEMON Manuals