Installing Inner Side Section

Information

Information

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Fit inner side section and check that it fits perfectly.
Apply adhesive on bonding areas of the body.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

>Application depth 0, 5 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas
Apply adhesive on inner side section.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

>Application depth 0.5 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
1. 3.1 Also apply a bead of adhesive all around the bonding surface.
  >Application depth 3 mm
Apply adhesive on inner side section.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

>Application depth 0.5 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area
1. 4.1 Also apply a bead of adhesive all around the bonding surface.
  >Application depth 3 mm
Rivet in inner side section. >BLIND RIVET 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivet
Secure inner side section.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
1. 6.1 Rivet in inner side section. >BLIND RIVET 999.190.229.01
2. 6.2 Screw in self-tapping screws -1- .
  > 5X00IN24 SETTING SELF-TAPPING SCREWS
Rivet in inner side section. >BLIND RIVET 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivet
Screw in self-tapping screw -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screw