Removing Side Section Lower Part

Drill out penetrated joints using >diameter 4 mm .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Penetrated joints
Grind down welded seams -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seams
Heat bonding areas using >V.A.G 1416 - Hot-Air Blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove side section lower part.