LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 534855 Replacing Rear Longitudinal Member >> Removing Seat-Well Cross Member >> Removing The Seat-Well Cross Member

Removing The Seat-Well Cross Member

Information 

Only drill hole through the top sheet-metal panel. Do not damage the sheet-metal panel underneath.

  1. Loosen joints.
    G14407978Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Joint connections

    1. 1.1 Drill out spotwelds using >VAS 882 001 - spot-weld breaker  .
    2. 1.2 Grind down welded seams -1-  .
  2. Remove the seat-well cross member.
scientia non olet · About LEMON Manuals