Preparing Front Longitudinal Member (Closing Element) For Installation

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front longitudinal member (closing element)

1. 1.1 Drill out spotwelds using >diameter 6.6 mm  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas

1. 2.1 Prepare front longitudinal member (closing element) in areas -LHD vehicle -  for bonding and riveting.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

2. 2.2 Prepare front longitudinal member (closing element) in area -RHD vehicle -  for resistance spot-welding and bonding.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

3. 2.3 Prepare front longitudinal member (closing element) in area -Item C-  for applying a full steel weld.