Preparing Connection Areas Of The Body For Installing Rear Side Member And Front Side Member (Closing Element)

Align the sealing surfaces and connections of the body.
De-burr connection points and prepare them for joining.
Cut out marked areas -1- to ensure adequate clearance for blind rivets.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cutting
Prepare connection areas of the body for installation.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas
1. 4.1 Prepare marked areas -A - for resistance spot-welding and bonding.
  > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
2. 4.2 Prepare marked area -B - for full steel welding.
Prepare connection areas of body for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas