LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 534855 Replacing Rear Longitudinal Member >> PREPARING LUGGAGE COMPARTMENT BRACKET FOR INSTALLATIOn >> Preparing The Boot Bracket For Installation

Preparing The Boot Bracket For Installation

  1. Position the boot holder and secure it to the body.
  2. Drill bore holes for blind rivets through both sheet metal plates using >diameter 6.6 mm  .
    G14408024Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Joint connections

  3. Remove the boot bracket.
  4. Prepare boot bracket for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14408025Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Boot bracket

scientia non olet · About LEMON Manuals