LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 534455 Replacing Rear Cross Member >> Removing Rear Cross Member

Removing Rear Cross Member

  1. Unscrew self-tapping screws -1-  .
    G14407851Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws

  2. Loosen rear cross member.
    G14407852Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

    1. 2.1 Unscrew self-tapping screws -1-  .
    2. 2.2 Remove punch rivets using >VAS 852 001 - Body dent removal system, aluminium  and >VAS 6790 - Compact booster  .

      > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

  3. Heat bonding areas using >V.A.G 1416 - hot-air blower  .
    G14407853Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G14407854Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  4. Remove rear cross member.
scientia non olet · About LEMON Manuals