Removing C-Pillar Reinforcement

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Separation points

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

1. 2.1 Drill out penetrated joints -A-  and -B-  using >diameter 4 mm  .
2. 2.2 Drill out spotwelds -C-  using >diameter 6.6 mm  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

1. 3.1 Unscrew self-tapping screws -1-  .
2. 3.2 Drill out spotwelds -A-  using >VAS 882 001 - spot-weld breaker  .
3. 3.3 Remove punch rivets -B-  using >VAS 6790 - compact booster  .

   > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

4. 3.4 Drill out penetrated joints -C-  using >diameter 4 mm  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area