LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 53 - Body Rear >> WM, 532455 Replacing Rear Trunk Floor Panel >> Removing Rear Boot Floor Plate

Removing Rear Boot Floor Plate

  1. Drill out penetrated joints using >diameter 6.7 mm  .
    G14407675Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Penetrated joints

    G14407676Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Penetrated joints

    G14407677Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Penetrated joint

  2. Heat bonding areas using >V.A.G 1416 - Hot-Air Blower  .
    G14407678Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G14407679Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

  3. Remove rear boot floor plate.