Preparing Connection Areas Of The Body For Installing Rear Cover Plate

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Align contact surfaces and connections for the rear cover plate.
2. De-burr connection points and prepare them for joining.
3. Prepare connection areas of body for bonding and riveting.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Connection areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Connection areas