LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame >> WM, 519419 Removing And Installing Cover For Rear Underbody >> Installing Cover For Rear Underbody

Installing Cover For Rear Underbody

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws on cover for rear underbody to >Tightening torque 2.5 (1.8 ftlb.) Nm  .

    Tighten screws on cover at the left and right to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

scientia non olet · About LEMON Manuals