Preparing Gusset Plate For Installation

Fit in gusset plate and secure it to the body.
Drill bore hole for blind rivets through both sheetmetal plates using >diameter 6.6 mm .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Gusset plate
Drill bore hole for blind rivets through both sheetmetal plates using >diameter 6.6 mm .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Gusset plate
Remove gusset plate.
Prepare gusset plate for joining.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas
1. 5.1 Prepare gusset plate for bonding and riveting in areas -A - .
  > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
2. 5.2 Prepare gusset plate for applying a full steel weld in areas -B - .