Installing (Inner) B-Pillar Reinforcement

Information 

• Apply adhesive evenly over the entire bonding surface. 

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Apply adhesive on bonding area -A-  of the body.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   >Application depth 3 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint areas

2. Apply adhesive on bonding area of the body.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   >Application depth 3 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint area

3. Apply adhesive in areas -A-  on the (inner) B-pillar reinforcement.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   >Application depth 0.5 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint areas

   1. 3.1 Also apply a bead of adhesive all around the bonding surface.

      >Application depth 3 mm 

4. Secure (outer) B-pillar reinforcement.

   Blind rivets

   1. 4.1 Apply a steel resistance spotweld in areas -A-  .
   2. 4.2 Rivet in (outer) B-pillar reinforcement in areas -B-  .>BLIND RIVET 999.190.229.01 
   3. 4.3 Apply a full steel weld to the (outer) B-pillar reinforcement.
5. Secure (outer) B-pillar reinforcement.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Steel welding

   1. 5.1 Apply a steel resistance spotweld in the areas.
   2. 5.2 Apply a full steel weld to the (outer) B-pillar reinforcement in areas -1-  .