Preparing Connection Areas Of The Body For Installation
- Align the sealing surfaces and connections of the body.
- De-burr connection areas and prepare for joining.
- Drill holes for plug welds in marked spacing through the body in the area of the A-pillar reinforcement -1-
with a>diameter 8 mm
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Holes
LENGTH SPECIFICATION
A >Length 12 mm B >Length 25 mm C >Length 20 mm - Prepare marked areas of the body for joining.
Joint areas
JOINT AREA DESCRIPTION
A Gluing
> 5X00IN21 WORK WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00B Full steel weld/plug weld