Installing Outer Side Panel Section

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Check that the outer side panel fits perfectly and fasten it to the body.
2. Apply a full aluminum weld to the outer side panel section.

   > 5X00IN10 WELDING ALUMINIUM

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying full aluminum weld

3. Rivet in outer side panel section.

   >BLIND RIVET 999.190.228.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rivet