Preparing Connection Areas Of Body For Installing Outer Roof Pillar

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Align the sealing surfaces and connections of the body.

   > 5X00IN61 WORK SEQUENCE FOR ACCIDENT REPAIRS

2. De-burr connection points and prepare them for joining.
3. Prepare marked areas for bonding and riveting.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding area on body

4. Prepare connection areas for applying a full aluminum weld.

   > 5X00IN10 WELDING ALUMINIUM

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Welding area on body