Preparing Connection Areas Of The Body For Installing The Roof

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. De-burr connection points and prepare them for joining.
2. Prepare marked areas for bonding and riveting.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding area

3. Prepare marked areas for bonding using Porsche 2-component window adhesive.

   > *** 6X00IN Working with Porsche 2-component window adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding area of body