Removing Front Side Member
- Loosen front side member.
- 1.1 Mark and make cuts measuring >Distance 47 mm
and >Distance 107 mm
.
Separation points
- 1.2. Remove separated plate.
- 1.3. Unscrew self-tapping screws.
> 5X00IN24 SETTING SELF-TAPPING SCREWS
Self-tapping screws
- 1.1 Mark and make cuts measuring >Distance 47 mm
and >Distance 107 mm
.
- Remove punch rivets using >VAS 852 001 - Body Dent Removal System, Aluminum
and >VAS 6790 - Compact Booster
.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Remove punch rivets using >VAS 852 001 - Body Dent Removal System, Aluminum
and >VAS 6790 - Compact Booster
.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Loosen front side member.
Friction element welded joint
- 4.1 Loosen friction element welded joint.
- 4.2 Grind down welded seam -1- .
- Loosen friction element welded joints.
> 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT
Friction element welded joints
- Heat bonding areas using >V.A.G 1416 - Hot-Air Blower
.
Bonding areas
- Heat bonding area using >V.A.G 1416 - Hot-Air Blower
.
Bonding area
- Heat bonding areas using >V.A.G 1416 - Hot-Air Blower
.
Bonding areas
- Heat bonding areas using >V.A.G 1416 - Hot-Air Blower
.
Bonding areas
- Heat bonding area using >V.A.G 1416 - Hot-Air Blower
.
Bonding area
- Remove front side member.