Removing Cross Member Reinforcement

Mark and make cut -A- . >Distance 53 mm

Fig 1: Checking Cross Member Reinforcement Cutting Dimension
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cut
Loosen cross member reinforcement.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cross member reinforcement
1. 2.1 Unscrew self-tapping screws -1- .
  > 5X00IN24 SETTING SELF-TAPPING SCREWS
2. 2.2 Drill out spotwelds. >diameter 6.6 mm
Heat bonding areas using >V.A.G 1416 - Hot-Air Blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove cross member reinforcement.