Installing Two-Piece Inner Shoe

Apply adhesive evenly over the entire bonding surface.

Install inner shoe at the bottom.

1.1 Apply adhesive on inner shoe at the bottom.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

>Application depth 0.5 mm

Fig 1: Checking Inner Shoes Cutting Dimension - Bottom
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner shoe, bottom
1. 1.1.1 Also apply a bead of adhesive all around the bonding surface.
  >Application depth 3 mm

1.2. Rivet in inner shoe at the bottom.

-dimension A- >Overlap 45 mm

G14405523

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner shoe, bottom

>BLIND RIVET 999.190.229.01

Install inner shoe at the top.

2.1 Apply adhesive on inner shoe at the top.

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

>Application depth 0.5 mm

G14405524

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner shoe, bottom

2.1.1 Also apply a bead of adhesive all around the bonding surface.
>Application depth 3 mm

2.2. Rivet in inner shoe at the top.
-dimension A- >Overlap 45 mm

Fig 2: Checking Inner Shoes Cutting Dimension - Top
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner shoe, top

>BLIND RIVET 999.190.229.01